# Serious Attention #

**************************************************
There are 7 options models in this products listing, the Prices and accessories is much different

Please check it carefully and select the suitable models when you place orders. Thanks.
**************************************************

N20 Handle Features

Battery Capacity: 350mAh
Charging Time: <50mins
Battery Type: Li Battery
Form Factor: 213*64*33mm
Electric Torque: 0.25-0.35N.m
Net Weight of the Screwdriver: 54g
Voltage: 3.7V-DC
Free Speed: 200r/min
Manual Torque: 3N.m
Net Weight: 256g

N30 Handle Features

Battery Capacity: 350mAh
Charging Time: <50mins
Battery Type: Li Battery
Form Factor: 213*64*33mm
Electric Torque: 0.45-0.5N.m
Net Weight of the Screwdriver: 54g
Voltage: 3.7V-DC
Free Speed: 300r/min
Manual Torque: 3N.m
Net Weight: 256g

1. 3 times the torque (manual torque: 3N.m electric torque: 0.45-0.5Nm)
2. Increase the speed (idling speed: 300 r/min)
3. Locked-rotor protection (0.2S of locked-rotor will stop the power supply to the motor, mainly to protect the motor. Prevent the motor from overheating and burn out the motor and circuit board)
4. Charging prompt (the charging light changes from white to red when charging, and green when fully charged)5. Low battery reminder (when there is no power, press forward, reverse, the electric screwdriver does not work, the light flashes 5 times)
6. Motor protection (the motor changes from forward to reverse, or from reverse to forward, and the electric screwdriver starts with a delay of 0.1 S, mainly to protect the motor and prolong its service life)
7. Lifespan is improved (the motor will automatically stop after two minutes of rotation, and it will start when pressed again to prolong the life of the motor and battery)
8. Power saving mode (the light will automatically turn off after pressing once for 3 minutes)

Applicable scenarios

Suitable for repairing various precision electronic products and digital products, such as cell phones, laptops, cameras, watches, game consoles, PS5，Xbox，Switch, etc.

N20 handle 28 in 1 set

package list：
screwdriver handle*1
magnetizer/demagnetizer*1
crowbar*1
type-c charging cable*1
s2 steel bits*24
packing boxes*1

Bits size: 4x28mm

bits type：
Phillips: PHOOO, PHOO, PHO, PHI, PH2
Flathead: SL1.5, SL2.0, SL3.0, SL4.0
Torx: T2, T3, T4,
Torx security: T5H, 6H, T8H, T10H, T15H
H1.5, H2.0
Pentalobe: ☆P2(Pentalobe 0.8),☆ P5(Pentalobe 1.2)
Spanner: U2.6
Tri-point: Y1
Triangle: △2.3

Charging Instruction

When using the USB charging port, the charging indicator shows white means “ charging", shows green means“ full chargew.
1. Please charge the screwdriver fully and the charging time is no more than 2.5 hours before when the screwdriver the first time.
2. Please charge the screwdriver at lease once a month to maintain a good performance.
3. Only charge the screwdriver by using the provided cable.

Using Precaution

1. When using the electric screwdriver to remove screws, please use the manual mode to loosen the screws avoid destroy screws and other parts at screws.
2. When not using the electric screwdriver, please put it out of the reach of the children.
3. If the product falls into the water or splashes into the machine, please stop using it to avoid short circuit.
4. When maintain the electric screwdriver, please check the smoothness of the screwdriver head rotation, whether other parts are damaged, etc. If there are some damages, please repair it before using. Using the damaged electric screwdriver may cause accidence.
5. When the fastener or the hidden wire operation may be touched, the electric screwdriver should be held by the holding surface of the insulator.
6. Don't disassemble this product.
7. Please follow the instructions.